Active splitter/distributor/mult/bus access with a lot of advanced features.
Dual 1×4 active splitter/buffered mult.
Zero-impedance* output drivers with short-circuit protection.
Input RF filtering.
Can distribute signals from internal CV & GATE bus.
Can translate external signals to internal CV & GATE bus.
Additional internal output connectors.
Easy configurable via jumpers.
zSPLIT has tho identical section with one input and four outputs. Inputs 1 & 2 and outputs 1,2,3 & 5,6,7 are on the front panel and outputs 4 & 8 are on the back connector.
1. Linked splitter (Default).
“Normal” contacts of each input jacks are connected to other section. “Internal Out” connector can be used to drive possible extensions, for example zOUT or internal inputs of zSUM-4, or what you want.
2. CV/GATE distribution.
Each “Normal” contacts on input jacks are connected to CV & GATE busses on power rails and distribute it to outputs. “Internal Out” connector can be used to drive possible extensions, for example synthesizer with internal CV/GATE connectors or 1/4″ jacks or bananas to translate signals to other systems.
3. CV & Gate bus driver. Outputs 4 & 8 are connected to CV & GATE busses on power rails and driving it. Inputs 1 & 2 are independend from each other.