FPX-6 Flat Power Expander

FPX-6 is intended for installation directly on the bottom surface of eurorack cases to provide maximum depth for your modules. The bottom layer of FBX-6 board is entire ground plane, so no isolation or standoffs needed. FPX-6 is а dual layer PCB with 6 shrouded surface mounted male box headers. Also it has 4 of 100nF filtering capacitors and 2 of 1 Ohm resistors on +12V and -12V rails to bypass noisy or high sensitivity modules from other system.

Board dimensions:  28mm x 117mm x  12.3mm (1.1″ x  4.6″ x 0.48″ )

Board outline: FPX-6_v.02_outline.pdf